-40%
WACHS PNEUMATIC TRAV-L-CUTTER MODEL E WITH 15 CUTTING WHEELS & CHAIN
WACHS PNEUMATIC TRAV-L-CUTTER MODEL E WITH 15 CUTTING WHEELS & CHAIN
WACHS PNEUMATIC TRAV-L-CUTTER MODEL E WITH 15 CUTTING WHEELS & CHAIN
WACHS PNEUMATIC TRAV-L-CUTTER MODEL E WITH 15 CUTTING WHEELS & CHAIN
WACHS PNEUMATIC TRAV-L-CUTTER MODEL E WITH 15 CUTTING WHEELS & CHAIN
WACHS PNEUMATIC TRAV-L-CUTTER MODEL E WITH 15 CUTTING WHEELS & CHAIN
WACHS PNEUMATIC TRAV-L-CUTTER MODEL E WITH 15 CUTTING WHEELS & CHAIN
WACHS PNEUMATIC TRAV-L-CUTTER MODEL E WITH 15 CUTTING WHEELS & CHAIN
WACHS PNEUMATIC TRAV-L-CUTTER MODEL E WITH 15 CUTTING WHEELS & CHAIN
WACHS PNEUMATIC TRAV-L-CUTTER MODEL E WITH 15 CUTTING WHEELS & CHAIN
WACHS PNEUMATIC TRAV-L-CUTTER MODEL E WITH 15 CUTTING WHEELS & CHAIN
WACHS PNEUMATIC TRAV-L-CUTTER MODEL E WITH 15 CUTTING WHEELS & CHAIN

WACHS PNEUMATIC TRAV-L-CUTTER MODEL E WITH 15 CUTTING WHEELS & CHAIN

$ 2032.8

Availability: 100 in stock
  • Machine Type: PIPE BEVELING MACHINE
  • Bevel Angle: 30 TO 37.5 DEGREES
  • Item must be returned within: 30 Days
  • Condition: DISASSEMBLED, CHECKED FOR WORN PARTS, REPLACED FEW PARTS & CLEANED, THEN RAN TO MAKE SURE EVERYTHING FUNCTIONED AS IT SHOULD.
  • Country/Region of Manufacture: United States
  • MPN: Model E
  • Refund will be given as: Money Back
  • Brand: WACHS
  • All returns accepted: Returns Accepted
  • Model: MODEL E
  • Return shipping will be paid by: Buyer
  • Restocking Fee: No
  • Power Source: Pneumatic

    Description

    YOU ARE BUYING ONE
    WACHS  TRAV-L-CUTTER MODEL E WITH 15 CUTTING WHEELS & LOTS OF CHAIN (
    APPROXIMATELY 260 INCH'S)
    WE CAN SHIP COLLECT USING YOUR FREIGHT COMPANY AND BILL OF LADING
    ALSO FREE LOCAL PICKUP. IF YOU HAVE QUESTIONS, MESSAGE ME.
    SERIAL ...................... 215380
    MODEL ....................... E
    PIPE OUTSIDE DIAMETER ....... 6" TO 72"
    CUTTING SPEED ............... 35 TO 55 RPM
    BEVEL ANGLE ................. 30 & 37.5 DEGREE
    MATERIAL REMOVED ............ .188"
    CUTS & BEVELS SIMULTANEOUS .. YES
    CFM REQUIRED ................ 100 @90 PSI
    PNEUMATIC MOTOR ............. 3/4 HORSEPOWER
    CUTS PIPE HORIZONTAL OR VERTICAL