R12, R-12,Refrigerant 12, Recharge Kit w/Leak Stop, Moisture Remover UV Leak Dye

Description

(1) 28 oz. R12 Refrigerant with ProSealXL4 System Sealer Leak Stop, ProDryXL4 Removes Moisture from System & UV Leak Detection Dye.
(1) CGA600-Valve, Top-Mount, Screw-On, can taper with on/off valve and 1/4" male flare hose connection.
*ProSealXL4, System Sealer
Forms a hard seal on metal, Schrader valves, O-rings, gaskets, a/c condensers, evaporators, line sets and solder joints
Enviro-Safe Proseal XL4 repairs minor leaks in home, heat pump, large auto, and industrial applications
One can will normally repair a leak in systems up from 1.5 to 5 ton. If you have a smaller unit, please contact us.
If the a/c system that will not hold a vacuum, you need to use the Enviro-Safe Prodry XL4.
The reason for the vacuum or the use of Enviro-Safe Prodry XL4 is that it will eliminate moisture in the system. Moisture mixing with oils and refrigerant can cause you system to make sulfuric acid which will corrode and eat your system!
**ProDry, Removes Moisture from System
Should be used in all systems to prevent acid-corrosion.
Treats 1 1/2 - 5-ton units
Use before ProSeal XL4 to protect sealants from reacting in system.
Can be used as a system-protector against system failure.
Protects against leaks formed by corrosion.
Enviro-Safe ProDry XL4 contains a dehydrating agent that converts system moisture into oil. We recommend the use of ProDry XL4 before the use of Enviro-Safe ProSeal XL4 to ensure all moisture has been removed from the air conditioning system.
Should be used on any home A/C system that has leaked below 15 psi (running or not running) or if the system has ever leaked below 15 psi in the past.  If you do not wish to use Pro Dry XL4, the system must be vacuumed prior to installing ProSeal XL4.
When put into an A/C system that has moisture or air, Pro Dry XL4 mixes with the moisture and air in system forming a synthetic oil which then mixes with the oil in the system.
***UV Leak Detection Dye
Enviro-Safe Dye Charge is fully compatible with mineral, ester and pag oils.
Highly concentrated dye (fluorescent yellow)
In some cases, you can see the dye with the naked eye.
The dye works best with the use of a black light and UV glasses.
This is the same color dye that most auto makers inject into the vehicle when new.
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped.
*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.