-40%
PTFE Virgin Sheet, 1/8
PTFE Virgin Sheet, 1/8
PTFE Virgin Sheet, 1/8
PTFE Virgin Sheet, 1/8
PTFE Virgin Sheet, 1/8
PTFE Virgin Sheet, 1/8
PTFE Virgin Sheet, 1/8
PTFE Virgin Sheet, 1/8
PTFE Virgin Sheet, 1/8
PTFE Virgin Sheet, 1/8
PTFE Virgin Sheet, 1/8
PTFE Virgin Sheet, 1/8

PTFE Virgin Sheet, 1/8" - .125" x 12" x 24" White

$ 25.65

Availability: 66 in stock
  • Item must be returned within: 30 Days
  • Condition: New
  • Sheet Width: 12 in
  • Return shipping will be paid by: Buyer
  • MPN: Does Not Apply
  • Color: White
  • Material: PTFE
  • Restocking Fee: No
  • Refund will be given as: Money Back
  • Sheet Length: 24 in
  • Model: Not Applicable
  • Plastic Type: PTFE
  • UPC: Does not apply
  • Plastic Color: White
  • All returns accepted: Returns Accepted
  • Sheet Thickness: 1/8 in
  • Brand: Basic

    Description

    PTFE Virgin Sheet, 1/8" - .125" x 12" x 24" White, 1 Pcs
    Thickness Tolerance +/-.007"
    Width Length Tolerance +/- .125"
    From the extrusion and cooling, plastics have stress gradients through their cross section which are not relieved by post processing at the manufacturer.
    Ptfe's flatness stability is substantially lower than metals.
    PTFE has internal stresses built up inside of the sheet. The extrusion process at the factory results in different parts of the sheets solidifying at different times as the sheet cools, possibly causing some parts of the sheet to tighten from the cooling before other hotter sections have yet to finish cooling. When a sheet is cut, it relieves that stress. As a result, the piece that is cut, especially for thin sheets come out slightly warped. Especially around the perimeter of the sheet.
    All shapes (i.e. rod and plate) have a balanced stress state with respect to the shape centerline. If during machining, Cutting more material is removed from one side of the centerline than the other, the material will “dish up” towards the side with more material removed. The amount of residual stress locked into the material determines how much the material will move once the outer material is removed.
    The same condition exists in metals. However, the lower stiffness of plastics makes the magnitude of this more significant.
    PTFE's melting point is 327 °C (621 °F), but its mechanical properties degrade above 260 °C (500 °F).
    RETURN'S
    Where we are at fault. Item not as described, damaged or an obvious error on our part is guaranteed a full refund, inclusive of any & all shipping
    per our stated directions. RETURN DIRECTION’s; All returns MUST be in the original condition received.
    All returns MUST be shipped in the same manner as we shipped originally.
    ANY ADDITIONAL COST UP & BEYOND THE ORIGINAL COST, INCURRED IN RETURNING YOUR ITEM IS NOT REFUNDABLE. (if you choose to return an item at
    a higher rate than we originally shipped to you? This portion is NOT refundable) Refunds due because of a no error on our part are completed as
    an item refund only. Shipping is excluded. PLEASE feel free to contact us with any questions or concerns, as we strive for 100% satisfaction & happy customers.
    Items with a free shipping 20% restocking fee will apply.